How to prevent camera shake

Taking a motion blur portrait? Struggling with the camera shake? Follow these five steps to eliminate the annoying camera shake.

1. Get a tripod

When your shutter speed dips below the focal length of your lens (1/50 sec for a 50mm lens, for example) you run the risk of camera shake when shooting handheld. A tripod is vital in such circumstances.

Best tripod and camera support: 13 tested

2. Mirror lockup

When you ﬁre your shutter the mirror that directs light through the viewﬁnder quickly lifts. At slower shutter speeds this thump can cause shake, so consider enabling the Mirror Lockup function.

3. Burst mode

The act of pressing the shutter button can shake the camera too, even on a tripod. Set High-speed Continuous drive and shoot in bursts; even if ﬁrst shot is soft the next few should be sharper.

How to take manual control of your camera

4. Cable release

If you're worried about camera shake caused by pressing the shutter button, use a cable release to trigger your DSLR without touching it. The self-timer can take too long for portraits like this.

5. Live view

Live View can be useful when shooting longer exposures. Not only does the large screen help when composing, but the mirror also locks up, so there's no chance that the mirror clunk will cause shake.

How to avoid common mistakes at every shutter speed