In keeping with Pioneer's Kuro range of plasma TVs, the brand's new LX50 receiver is dressed in the obligatory piano-black. And yes, the finish looks fantastic, at least until you deposit fingermarks on it.

This THX Select 2-certiļ¬ed 7.1 product, capable of delivering over 120W to five channels, lives at the bottom-rung of Pioneer's LX range, and is positioned roughly midway in the company's overall AVR portfolio.

Trendy features

At first glance, it appears packed with some trendy features, including the ability to interface with an iPod (video and photos can be played, as well as audio) and a USB port for playing MP3, AAC and WMA tracks from plug-in storage devices (with limited support for DRM-protected ļ¬les). An onboard radio tuner caters for FM and AM, but stops short of DAB.

Then there's its support for DTS Express (a new low-bitrate DTS variant), Dolby's equivalent (Dolby Digital Plus) and WMA 9 Professional multichannel audio - home cinema PC enthusiasts will deļ¬nitely appreciate the latter.

Other surround modes include Dolby EX, DTS 96/24, and Pro-Logic IIx, as well as the expected DTS, Dolby Digital and 'first-generation' Pro-Logic. Oh, and audiophiles will appreciate that Super Audio CD and DVD-A soundtracks can be digitally-transmitted to the LX50 from a compatible universal player via HDMI.

Naturally Dolby True-HD and DTS-HD Master Audio soundtracks can also be routed into the receiver via HDMI from hi-def players. Virtually all current HD disc players decode these in-deck and output lossless soundtracks as Linear PCM.

It's also possibe to deliver multichannel audio via the LX50's rear-panel 7.1 analogue inputs. Your choice of entry will be determined by your HD disc player.

Impressive connectivity

The LX50's video connectivity is also worthy of discussion. Incoming analogue video signals are converted into digital form, so that everything can be passed to your TV via a single HDMI cable. But there's no scaling; in other words, standard-deļ¬nition sources connected to the composite, S-video and component outputs are output at 576i or 576p (depending on settings).

Analogue NTSC sources like Region 1 DVDs, meanwhile, are output at 480i or 480p. And if you're feeding in HDTV via component, the HDMI output is kept at 720p or 1080i depending on the signal that the source presents to the receiver - you can't deinterlace 1080i to 1080p.

That a number of the VSXLX50's rivals do offer upscaling may be an issue for some buyers, but I would suggest that keeping video in its original state is no bad thing, because it avoids the artefacts that certain scalers tend to introduce. There is 1080p support, too: the player offers two HDMI 1.3 inputs.

I would have appreciated at least three, but you can't have everything...

Getting set-up

Setting up the LX50 takes advantage of onscreen menus and Auto-MCACC auto-calibration, now in its 'advanced' 9-band incarnation. The latter uses a plug-in mic to analyse your room acoustics and the output it presents to your speakers takes into account MCACC's ļ¬ndings.

Sometimes, manual intervention is pleaded for - if it can't detect a speaker or reckons that the sub level is too low, it will grind to an immediate halt so that the necessary corrections can be made.

Overall, I found that the system did a fair job that most would find acceptable - especially if the idea of manually calibrating levels, delays and so on is a daunting prospect. However, it's worth investing some time and effort in understanding what MCACC can do - a manual tweak here and there can work minor wonders.