Q Acoustics 1020i loudspeaker review

A budget speaker that successfully rewrites the value-for-money rule book

Q Acoustics 1020i loudspeaker
The miniature Q Acoustics 1020i loudspeakers offer great value for money and good sound quality to boot

TechRadar Verdict

Outstanding value for money, the smooth, well-balanced and lively sound makes for a fine communicator. Small size inevitably limits bass extension and dynamic vigour, but speaker balances well with some help from wall proximity

Pros

  • +

    Exceptional sonic value for money

  • +

    Smooth and well balanced

  • +

    Lively and very communicative

Cons

  • -

    Needs careful positioning

  • -

    Modest bass extension

  • -

    Not much dynamic grip

  • -

    Some upper midband forwardness

Why you can trust TechRadar We spend hours testing every product or service we review, so you can be sure you’re buying the best. Find out more about how we test.

Last time around, we tried the largest (the 1050) and the smallest (the 1010 baby), both of which offered a lot of speaker for relatively little money. The same basic formula still holds with the new models, though on this occasion we're examining the £140 per pair 1020i, a worthwhile step up the 'size ladder' from the tiny 1010, but at seven litres still very much a miniature.

Indeed, the 1010 is so small it's really only suited to surround sound duties, whereas the 1020i should work pretty well as a stereo speaker system, especially in smaller rooms and when close to a wall. These factors will help compensate for the limited bass supplied by the 90mm cones of the 125mm bass/mid drivers and 65hz-tuned twin front ports.

The chunky-looking MDF enclosure, finished in cherry, beech or black vinyl woodprints, seems very tough and needs no extra bracing.

The wrap edges are nicely post-formed, a 25mm soft dome tweeter is rear-mounted into the curved, silver painted front layer of an extra thick baffle and the signal is applied via twin terminal pairs.

Quality compromise

Such a small speaker can hardly be expected to offer much in the way of bass extension, but the compromises adopted here are very well judged, provided the user is happy to locate the speakers quite close to a wall.

The treble is notably smooth and well judged, but there is a peaky tendency around 700hz -1khz. The impedance is around 4.5ohms across much of the band, with mild variations between the two samples.

Sure you don't get much in the way of dynamic drive and there's no deep bass to speak of either. But those are amongst the rarer and more costly features and utterly improbable at £140 per pair.

Accepting these constraints, the 1020i does nearly everything else impressively – nay, remarkably – well, delivering an overall sound quality that would do credit to a speaker two or three times the price.

Beautifully balanced and quite smooth too, if a tad forward in the voice band. It's also lively and very informative – a remarkable combination for such an inexpensive speaker