Noise cancelling tech comes to car interiors

Just like posh headphones, posh cars now have better acoustics too
Just like posh headphones, posh cars now have better acoustics too

The principle behind noise-cancelling headphones is as elegant as it is simple – sample the noise to be cancelled out and use small speakers to create an equal, but opposite, sound that erases the problem.

Now, Toyota has taken that concept and applied it to one of its high-end hybrid cars, in a concerted effort to reduce interior noise for the comfort of passengers.

Low frequencies

The company's 'Active Noise Control' system appears in the new Toyota Crown Hybrid car and reduces the noise inside the vehicle by up to 8dB. It was implemented after the car's engine was found to be noisier than expected as it rotates more slowly for better efficiency.

Toyota discovered that the low-frequency noises given off by the engine were more audible than in other cars with similar equipment under the bonne. The company tackled it by first adding three interior microphones to listen in on cabin conditions.

Engineering challenge

Then, it installed three speakers – on the front doors and the rear shelf – to play back the cancelling signals. The car's music system can still be used at the same time, of course.

Although describing the system like that is relatively simple, the acoustics inside a car made getting it right a challenge.

Unlike headphones, the in-car system has to deal with both direct noise and its echo when it bounces off interior walls. The result is a system that cancels out the engine sounds around head height – precisely where our ears are, in other words.

J Mark Lytle was an International Editor for TechRadar, based out of Tokyo, who now works as a Script Editor, Consultant at NHK, the Japan Broadcasting Corporation. Writer, multi-platform journalist, all-round editorial and PR consultant with many years' experience as a professional writer, their bylines include CNN, Snap Media and IDG.