Thunderbolt 2 vs USB 3.0 vs eSATA

What's the best way to connect your kit?

Thunderbolt 2 vs USB 3 0 vs eSATA

The high-speed Thunderbolt standard has been given a huge upgrade, and it can now deliver twice as much data through a single channel. But it isn't the only high-speed connection available: there's USB 3.0 and eSATA too. How do they compare, and what are they best for?

Thunderbolt 2 vs Thunderbolt 1: What's new?

The second generation of the Thunderbolt standard combines DisplayPort and PCI Express data and is faster than its predecessor – it can drive a 4K display with a single connector, and it delivers roughly twice the data speeds as its forerunner – but it has the same maximum bandwidth as its predecessor: 40Gbps.

The difference is in how that bandwidth is parcelled out. In the original Thunderbolt standard there were four one-way channels offering 10Gbps each – two upstream channels and two downstream.

With Thunderbolt 2, there are two bidirectional channels delivering 20Gbps each. That means a single channel has more than enough power to drive a 4K display or high-speed storage device, but if you want to do both things at once you'll need to devote a channel to each one as daisy-chaining won't give you enough throughput.

Thunderbolt 2 vs USB 3.0 vs eSATA: Speed

All three standards are much, much faster than USB 2.0, which tops out at 480Mbps. eSATA can deliver 6Gbps (older versions deliver 1.5Gbps or 3Gbps), USB 3.0 runs at up to 5Gbps and the incoming USB 3.1 should do 10Gbps. Thunderbolt can do 20Gbps.

As we've already explained above Thunderbolt 2 isn't actually faster than the original 10Gbps Thunderbolt standard, but if you wanted to get 20Gbps out of that you needed to combine two 10Gbps channels. You don't need to do that with Thunderbolt 2.

As with all maximum throughput figures, quoted speeds are theoretical maximums and don't take data overheads into account. The performance you actually get in the real world will also depend on your devices and their configurations.

Thunderbolt 2 vs USB 3.0 vs eSATA: Compatibility

Thunderbolt combines two protocols, PCI Express (PCIe) and DisplayPort, which means you can connect monitors, external drives, video capture devices and so on. The DisplayPort element is backwards compatible, but you'll need a cable adaptor to connect an existing DisplayPort monitor. You can also connect DVI, HDMI and VGA displays via adapters, and if you use OS X you can network two Macs over a Thunderbolt connection rather than the traditional Ethernet.

Thunderbolt 2 uses the same connectors as the original Thunderbolt standard, so you'll be able to connect Thunderbolt devices to Thunderbolt 2 ports and/or cables and vice-versa. As with other standards' backwards compatibility, you won't benefit from the newer version's faster speed when you connect an older device.

That's worth remembering if you'll be connecting Thunderbolt and Thunderbolt 2 devices on the same chain – you'll need to put the original Thunderbolt devices at the end of the chain, not the beginning, or everything will run at Thunderbolt 1 speeds, not Thunderbolt 2.

USB 3.0 is backwards compatible, so you can connect USB 2.0 devices to a USB 3.0 hub and vice-versa, although of course you won't get USB 3.0 speeds from a USB 2.0 device or port. If you want to run multiple USB devices you'll usually need multiple ports or to invest in a hub – USB devices tend to be designed for standalone use, not daisy-chaining like many Thunderbolt devices.

eSATA is an external version of Serial ATA, the standard used for high-speed internal hard disk connections. Some firms, such as Toshiba, make laptops with dual-mode ports that can connect either eSATA or USB devices.