xTool iOBD2 review

xTool brings car diagnostic and performance testing into the wireless age

xTool iOBD2
Full car diagnostics on your iPhone? That'll be the xTool iODB2

TechRadar Verdict

Pros

  • +

    Full OBD II diagnostics

  • +

    Wireless connectivity

  • +

    Slick smartphone app

Cons

  • -

    Some lag with live data

  • -

    Simple code readers are cheaper

  • -

    Mileage varies depending on model and age of car

Why you can trust TechRadar We spend hours testing every product or service we review, so you can be sure you’re buying the best. Find out more about how we test.

Home-brew car diagnostics generally do two things. With a little knowledge, they can save you money on car maintenance. And they can also be a lot of fun.

It's the latter that the xTool iOBD2, a combination of hardware and app that supports iPhone and Android, majors on. That's not to say, however, it can't do the useful bit.

It's at least as powerful as most low cost on-board diagnostics readers, possibly more so. But it gets the job done in a much more user-friendly way and throws some extra features into the mix. Best of all, it connects wirelessly to your smartphone.

What are on-board car diagnostics?

But let's not get ahead of ourselves. First a quick recap on what, exactly, digital car diagnostics involves.

It starts with the OBD II, or On Board Diagnostics Version 2, port. It's an industry-standard data port that provides an interface for pulling car diagnostics and error codes, among other info, in a common format.

OBD II was made mandatory in 1996 for all cars sold in the US. The European Union didn't follow suit until 2001. But the US stricture means most cars sold in the UK after 1996 have an OBD II port.

OBD II port

It's typically found somewhere under the dashboard. In our test car, a 1997 Porsche Boxster, the port is freely accessible without any dash disassembly, if slightly obscured. So a little neck craning aside, getting at it is no harder than, say, the USB port on the back of a tower PC.

A wide range of data can be pulled via iOBD2, from engine error codes to sensor data and current operating parameters like coolant temperature and road speed. Exactly what can and can't be read will depend both on your reading equipment and the make and model of car in question.

The OBD II port can also be used to program car ECUs, for instance resetting error codes. But that's another level of sophistication that doesn't apply to relatively straight forward readers like the xTool iOBD2.

What is the xTool iOBD2?

Those familiar with OBD access will probably be used to either a standalone reader or something that plugs into a laptop. Either way, we're talking cables.

The xTool iOBD2's party trick is wireless operation. It's a compact unit, not much larger than the OBD port itself and slightly narrower than an iPhone in width.

xTool iOBD2

Once plugged in, it draws power from the OBD II and boots up a wi-fi access point. Having first installed the free xTool app on your handset, you then connect to the iOBD2's wireless access point, plug in some simple network settings and you're good to go.

The initial connection and syncing routine as you set up a profile for your car is a little sluggish. But from then on, it's quick to get going from a cold start

Contributor

Technology and cars. Increasingly the twain shall meet. Which is handy, because Jeremy (Twitter) is addicted to both. Long-time tech journalist, former editor of iCar magazine and incumbent car guru for T3 magazine, Jeremy reckons in-car technology is about to go thermonuclear. No, not exploding cars. That would be silly. And dangerous. But rather an explosive period of unprecedented innovation. Enjoy the ride.