Manfrotto 055XPROB and 496RC2 head review

Heavyweight photography credentials yet still light enough to carry with ease

Manfrotto 055XPROB and 496RC2 head
A solid, reliable and popular tripod

Why you can trust TechRadar We spend hours testing every product or service we review, so you can be sure you’re buying the best. Find out more about how we test.

Manfrotto 055xprob and 496rc2 head

Build quality

Build quality on the Manfrotto 055XPROB tripod and 496RC2 head feels sturdy and dependable, from the rubber feet all the way up to the ultra firm-fitting quick-release plate on the head. All joints and controls operate very smoothly and easily, yet are very solid when locked in place.

Unlike some of Manfrotto's very cheapest tripods that we've used in the past, the 055XPROB tripod and 496RC2 ball head have a really professional feel to them, and are also very good value at the price.

One thing we would have liked to see, however, is the use of allen key screws rather than regular slotted screws for securing the head onto the tripod platform. This seems a bit of a penny-pinching measure.

Performance

In normal use, the Manfrotto 055XPROB legs and 496RC2 head combine to give rock-solid support, even at the highest available operating height of 187cm. Everything is quick and easy to adjust, from the top-quality leg section clip locks to the centre column lock and the clamping screw in the ball head.

The push-release catches for adjusting the angles of the legs has a similarly fast and simple action.

Speed and simplicity are carried through to the unique pivoting mechanism for the centre column, which relies on just one locking clamp, whereas most competing systems use two. All you need to do is to loosen the centre column lock, raise the centre column while pressing in a safety catch at its base, then pivot the centre column through 90 degrees. After pivoting, the same locking screw clamps the now horizontal centre column.

However, this simplicity comes at a cost. Competing centre column pivoting systems featured on the likes of the Benro A-297EX, Giottos MTL9361B and Vanguard Alt Pro 263AT all enable you to lock the centre column at practically any angle through 180 degrees in the vertical axis.

By contrast, the Manfrotto 055XPROB's centre column can only be used either vertically upwards or with a 90 degree pivot, as a horizontal boom. Compared with the competition, it lacks a bit of versatility.

You also lose the weight hook normally featured on the bottom of the tripod's centre column as this gives way to the safety lock release catch. Instead, a small hook forms part of the tripod shoulder at the top.

The sturdiness of the ball head is excellent and the friction damper featured on the Manfrotto 496RC2 is a useful addition. Unlike many ball and socket heads, there's a cut-out on both sides of the vertical position rather than just on one side, so you can easily flip the camera over to portrait orientation in both directions.

We liked

All operating functions are very quick and easy to use, build quality and performance are excellent throughout.

We disliked

While simple to operate, the pivoting centre column only has vertically upright or horizontal options, lacking the full range of 180-degree rotation offered in many competing tripods.

Final verdict

Great build quality and excellent stability are the hallmarks of the Manfrotto 055XPROB tripod and 496RC2 head. But it's also extremely simple to use, especially when it comes to the centre column pivot facility. The only downside is that the pivot lacks 180-degree versatility, as it can only be used in regular vertical mode or as a horizontal boom.