We paid a visit to the Ilford paper factory in Switzerland to take a look at what goes into producing photo paper.

Ilford is the largest independent inkjet media manufacturer in the world, and is capable of making photo paper that is compatible with almost any printer and ink combination.

The factory itself is large, and interestingly, it is not here that the paper itself is made – only its surface coatings, which transforms it from standard paper into photo quality paper, using " Ilford layer designs".

The tech of photo paper
Control room inside the ILFORD coating facility

The tech of photo paper
The ILFORD media coatings are created

It is in this technology that Ilford believes its expertise lies, with 14% of its entire workforce (many of whom hold doctorates from various leading universities) dedicated to research and development.

Ilford is also one of the world's oldest photographic companies, having started its work in silver halide photography back in 1879.

Today, the company works with multi-layer designs, structured surfaces and nano-particles to produce its paper products.

The tech of photo paper
The ILFORD site in Marly, Switzerland

The tech of photo paper
The photo paper coatings being created

The company creates a variety of different coatings for different photo paper kinds, including super glossy and matt products that are produced using nanoporous, polymer and hybrid technology.

Nanoporous technology was developed by Ilford for use as a receiving layer on inkjet media – and it uses it for its best-quality inkjet media.

Because the layer is porous, it can absorb ink almost instantly, leaving the paper feeling dry to the touch immediately after printing.

The tech of photo paper
Master rolls of ILFORD paper are prepared for shipping

The tech of photo paper
Slitting of inkjet media

By contrast, polymer inkjet receiving layers enable dye inks to penetrate into the layer to give longer lasting and more stable images. Dye inks have a wider colour gamut than pigment inks, but dye inks on polymer media take longer to dry.

Any time a new coating is manufactured, an extensive testing regime starting with less than a square metre of paper all the way up to 5,000 square metres is carried out. During this testing phase, even more science and technology is implemented. For instance, infrared lasers and fine resolution cameras are used to inspect the surface for defects of every piece of photo paper manufactured at Ilford.

Much of the science and technology involved in paper production is naturally kept under wraps, but it's interesting to note that the technology can also be used in other applications.

The tech of photo paper
The ILFORD media coatings are carefully monitored

The tech of photo paper
The ILFORD coating facility in Marly, Switzerland

These include agriculture, medicine, cosmetics, security systems, packaging, lighting, energy (coating for batteries) and consumer electronics, such as displays for televisions.

Ilford also works with printer manufacturers, such as Canon, which it has supported with ICC profiles made available to coincide with the launch of the Canon Pixma Pro-1, the brand's professional A3+ (16.5 x 11.7-inch) sized printer.

Other photographic industry partnerships exist, with Sony and Leica. Ilford worked with Sony to show that prints made from images taken with its Alpha cameras were of a sufficiently high standard, while Leica was worked with during the PhotoPlus Expo in 2011.

The tech of photo paper
The ILFORD finishing facility

The tech of photo paper
Boxes of ILFORD GALERIE paper come off the production line

The tech of photo paper
The ILFORD media coatings are created

The tech of photo paper
ILFORD media is coated

The tech of photo paper
Solution preparation for the media coatings

The tech of photo paper
The ILFORD media coatings are carefully monitored