The X-Rite Colormunki Display calibrates monitors and projectors, and comes complete with a friendly software package which contains step-by-step guides and video tutorials.
Ambient light is swiftly measured while display flare may also be taken into account, and the process takes under 10 minutes from start to finish.
The results appear accurate, and the various image samples allow quick before and after comparisons post-calibration. It's not the cheapest or fastest device, but it's ideal for those new to the process.
The X-Rite Colormunki Display is an inexpensive monitor calibration device, which promises advanced control with ease of use. Capable of profiling wide-gamut displays and even projectors, the package contains a colorimeter complete with a diffuser panel, together with software and a Quick Start Guide.
Following the latter enables even first time users to quickly get to grips with its operation, while the profiling process may be run in either Easy or Advanced modes, depending on the user's skill level and desired control.
Once the software has been installed, an ambient light reading may be taken and calibration can begin. Everything is explained clearly and diagrams are provided, although video tutorials are also on hand should the user get stuck.
The software takes around two minutes to adjust the display's luminance using a series of patches, before the remainder are displayed and measured over an additional five minutes. Approximate timings are given throughout the process, and once complete it's possible to view before and after comparisons using a range of images.
The advanced controls enable you to measure flare from your display and to take this into account, along with white point specification and other options.
Overall, there's very little not to like: the results appear accurate and no obvious colour biases can be observed, and reminders can be set up should the lighting conditions change or if a large period of time elapses between calibrations.
The only minor niggle is that although it works in much the same way as the i1 Display Pro device, it's considerably slower (although around £50 cheaper too).
Still, for the novice user performing occasional calibrations, it's pretty much spot on, colour casts will be banished and all your future image adjustments accurate and worth while.